Low tire pressure message

up. A The yellow warning lamp lights up. A Check Control message is displayed.

▷ There is a flat tire or a major loss in tire inflation pressure.
▷ The system was not reset after a wheel change and thus warns based on the inflation pressures initialized last.

1. Reduce your speed and stop cautiously.

Avoid sudden braking and steering maneuvers.
2. Check whether the vehicle is fitted with regular tires or run-flat tires.Run-flat tires, are labeled with a circular symbol containing the letters RSC marked on the tire sidewall.

tires Do not continue driving without run-flat tires
Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents.◀ When a low inflation pressure is indicated, DSC Dynamic Stability Control is switched on if necessary.

    See also:

    Switch off any functions that are not currently needed
    Functions such as seat heating and the rear window defroster require a lot of energy and consume additional fuel, especially in city and stopand- go traffic. Therefore, switch off these functio ...

    Switching on automatically
    Select transmission position R with the engine running. The Top View and PDC images are displayed if the system is switched on via iDrive. ...

    Transmission positions
    D Drive, automatic position Position for normal vehicle operation. All forward gears are available. R is Reverse Select only when the vehicle is stationary. N is Neutral Use in automatic car wa ...