Setting
Pull the switch.
The LED lights up.
The indicator lamp lights up in
red. The
parking brake is set.
Lower lamp: indicator lamp in
Canadian
models
Set the parking brake and further secure
the vehicle as required
Set the parking brake firmly when parking; otherwise,
the vehicle could roll. On steep upward
and downward inclines, further secure the vehicle,
for example, by turning the steering wheel in
the direction of the curb. ◀
While driving
Use while driving serves as an emergency braking function:
Pull the switch and hold it. The vehicle brakes hard while the button is being pulled.
The indicator lamp lights up in
red, a signal
sounds and the brake lamps light up.
Lower lamp: indicator lamp in
Canadian
models
If the vehicle is braked to a speed of approx.
2 mph/3 km/h, the parking brake remains set.
See also:
Hiding Check Control messages
Hiding Check Control messages
Press the button in the turn signal lever up or
down.
▷ Some Check Control messages are displayed
continuously and are not cleared until
the malfunction i ...
Rear view: striking indications of dynamic and secure roadholding.
From the rear, the new BMW 6-Series Coupe exudes power, athleticism and
solidity. Bulging wheel arches accentuate the wide track of the new car,
offering a hint of its impressive roadholding. Adde ...
Traction
The traction grades, from highest to lowest, are
AA, A, B, and C.
Those grades represent the tire’s ability to stop
on wet pavement as measured under controlled
conditions on specified governme ...
