Ignition on

Automatic transmission: press the Start/Stop button, and do not press on the brake pedal at the same time.

Manual-shift transmission: press the Start/Stop button, and do not press on the clutch pedal at the same time.

All vehicle systems are ready for operation.

Most of the indicator and warning lamps in the instrument cluster light up for varying lengths of time.

To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.

The ignition switches off automatically:

▷ When the vehicle is locked, if the low beams are switched on.
▷ Shortly before the battery is discharged completely, so that the engine can still be started.
▷ If the engine is switched off and the ignition is switched on, the system automatically switches to the radio ready state when the door is opened if the lights are switched off or the daytime running lights are switched on.

    See also:

    Fold-out position of the wipers
    Required when changing the wiper blades or under frosty conditions, for example. 1. Switch off the ignition. 2. Under frosty conditions, ensure that the wiper blades are not frozen onto the wind ...

    Note
    Manufacturer's information for LATCH child restraint fixing systems To mount and use the LATCH child restraint fixing systems, observe the operating and safety information from the system man ...

    Radar sensor
    Position Radar sensor Dirty or covered sensor A dirty or covered sensor may hinder the detection of vehicles. ▷ If necessary, clean the radar sensor. Remove layers of snow and ice care ...