Active seat ventilation, front
The seat cushion and backrest surfaces are cooled by means of integrated fans.
The ventilation rapidly cools the seat, e. g., if the vehicle interior is overheated or for continuous cooling at high temperatures.
Switching on
Press the button
once for each ventilation
level.
The highest level is active when three LEDs are lit.
If when the seat ventilation is turned on the Maximum Cooling function is activated, the seat ventilation automatically switches to the highest level. When the Maximum Cooling function is switched off, the unit switches to the previously set level.
After a short time, the system automatically moves down one level in order to prevent excessive cooling.
Switching off
Press the button longer.
The LEDs go out.
See also:
At a glance
▷ Display the traffic bulletins from radio stations
that broadcast the TI Traffic Information
of a traffic information service. Information
on traffic obstructions and hazards is
updated ...
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...
Run-flat tires
Label
RSC label on the tire sidewall.
The wheels are composed of special rims and
tires that are self-supporting, to a limited degree.
The support of the sidewall allows the tire to remain
dr ...