Fuel cap

Opening

1. Briefly press the rear edge of the fuel filler flap.

2. Turn the fuel cap counterclockwise.

2. Turn the fuel cap counterclockwise.

3. Place the fuel cap in the bracket attached to

3. Place the fuel cap in the bracket attached to the fuel filler flap.

Closing

Closing

1. Fit the cap and turn it clockwise until you clearly hear a click.

2. Close the fuel filler flap.

Do not pinch the retaining strap attached Do not pinch the retaining strap

Do not pinch the retaining strap attached to the cap; otherwise, the cap cannot be closed properly and fuel vapors can escape.

A message is displayed if the cap is loose or missing.

Manually unlocking fuel filler flap

In the event of an electrical malfunction, for example.

1. Open the cover on the right side trim. To do this, turn the cap.

2. Pull the green knob with the fuel pump symbol.

2. Pull the green knob with the fuel pump symbol.

This releases the fuel filler flap.

Observe the following when refueling

    See also:

    Issued warning
    If you leave the lane and if a lane marking has been detected, the steering wheel begins vibrating. If the turn signal is set before changing the lane, a warning is not issued. End of warning T ...

    Initialization
    The initialization process adopts the set inflation tire pressures as reference values for the detection of a flat tire. Initialization is started by confirming the inflation pressures. Do not ...

    Configuring the prewarning
    After the warning function is switched on, the following can be set via the iDrive: The prewarning can be switched on/off. The time of the prewarning can be set. These settings have no effe ...