Requirements
▷ The installed BMW Assist system is logged in to a wireless communications network.
This network must be capable of transmitting the services.
▷ To transmit position data, the vehicle must be able to determine the current position.
▷ To activate and update BMW Assist, a GPS signal must be available.
▷ The BMW Assist service contract was signed with your service center or with the BMW Assist Response Center. Enabling must have been completed.
▷ BMW Assist is activated.
See also:
Programming
Programming
1. Memory buttons
2. LED
Fixed-code hand-held transmitters
1. Switch on the ignition, refer to page 61.
2. Initial setup:
Press both outer memory buttons 1 for approx.
20 seconds ...
Ventilation in rear
Ventilation in rear
1 Use the thumbwheels to smoothly open and
close the air vents
2 Use the lever to change the direction of the
air flow ...
General information
The engine oil consumption is dependent on the
driving style and driving conditions.
Therefore, regularly check the engine oil level
after refueling. ...
