Updating the navigation data

General information

Navigation data are stored in the vehicle and can be updated.

Current navigation data and the authorization code are available from your service center.

▷ Depending on the data volume, a data update may take several hours.

▷ Update during the trip to preserve battery.

▷ During the update, only the basic functions of the navigation system are available.

▷ The status of the update can be viewed.

▷ The system restarts after the update.

▷ Remove the data carrier with the navigation data after the update.

Performing an update

1. Insert the navigation DVD into the DVD player with the labeled side facing up.

2. Follow the instructions on the Control Display.

3. Enter the navigation DVD authorization code.

4. Change the DVD, if necessary.

After interrupting your trip, follow the instructions on the Control Display.

Viewing the status

1. 2. "Navigation update" Press the button.

2. "Navigation update"

    See also:

    Switching on/off
    Switching on/off Press the button. ▷ On: the LED lights up. ▷ Off: the LED goes out. The system can issue warnings at speeds above approx. 30 mph/50 km/h. The state is stor ...

    Connecting the cables
    1. Open the cover of the BMW starting aid terminal. 2. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery, or to the corresponding starting aid termi ...

    Increasing desired speed
    Repeatedly press the lever to the resistance point or beyond, arrow 1, until the desired speed is reached. ▷ Each time the lever is pressed to the point of resistance, the desired speed i ...