Opening
1. Unlock the belt lock of the center safety belt in the rear using the latch plate of another safety belt.
2. Insert the latch plate at the end of the belt into the specially designated fixture on the rear window shelf.
3. Push the corresponding head restraint down as far as it will go.
4. Pull the corresponding lever in the cargo area to release the rear seat backrest.
5. The unlocked rear seat backrest moves forward slightly. Fold the backrest forward by the head restraint.
See also:
Turn signal, high beams,
headlamp flasher
Turn signal
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever to the resistance
point.
Unusually rapid flashing of the indicator lamp indi ...
Low tire pressure message
The yellow warning lamp
lights up. A
Check Control message is displayed.
► There is a flat tire or a major loss in
tire inflation pressure.
► The system was not reset after ...
Brightness
Setting the brightness
To set the brightness of the Control Display:
1. "Settings"
2. "Control display"
3. "Brightness"
4. Turn the controller until the desired br ...