Setting the language

Press and hold the control button for approx. 12 to 13 seconds. Briefly press the control button again to switch between English "E" and German "O".

The setting is stored automatically after approximately 10 seconds.

    See also:

    Malfunction
    A Check Control message is displayed. On the Control Display, the areas in front of and behind the vehicle are shaded. PDC has failed. Have the system checked. To ensure full operability: ` ...

    Deactivating DSC: DSC OFF
    When DSC is deactivated, driving stability is reduced during acceleration and when driving in bends. Stabilizing interventions by the Integral Active Steering system are only performed by the r ...

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. ▷ There is a flat tire or a major loss in tire inflation pressure. ▷ The system was not reset after a whee ...