Configuring the warning time
After the warning function is switched on, the warning time can be set via the iDrive. For a late warning time, prewarning is deactivated.
These settings have no effect on the time of the warning from the Active Cruise Control that prompts the driver to intervene or brake.
See also:
Jump-starting
Notes
If the battery is discharged, an engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables with
fully insulated clamp handles.
To prevent pe ...
Additional functions
Activating/deactivating the additional
functions
Activate the functions before pairing to be able
to use them in the vehicle. Information on suitable
mobile phones that support this function.
...
Drive-off assistant
This system supports driving away on gradients.
The parking brake is not required.
1. Hold the vehicle in place with the foot brake.
2. Release the foot brake and drive away without
delay.
Depen ...