Deactivating DSC: DSC OFF

When DSC is deactivated, driving stability is reduced during acceleration and when driving in bends.

To increase vehicle stability, activate DSC again as soon as possible.

Deactivating DSC

Press and hold the button, but not longer

Press and hold the button, but not longer than approx. 10 seconds, until the indicator lamp for DSC OFF lights up in the instrument cluster and DSC OFF is displayed.

The DSC system is switched off.

Activating DSC

Press the button.

Press the button.

DSC OFF and the DSC OFF indicator lamp go out.

Indicator/warning lamps

When DSC is deactivated, DSC OFF is displayed in the instrument cluster.

The indicator lamp lights up: DSC is deactivated. The indicator lamp lights up: DSC is deactivated.

    See also:

    Activating
    1. Turn the light switch to or . 2. Press the button on the turn signal lever, arrow. The indicator lamp in the instrument cluster lights up. When the lights are switched on, the high be ...

    Radar sensors
    The radar sensors are located under the rear bumper. The system may not be fully functional in the following situations: ▷ Dirty or icy bumper. ▷ Stickers on the bumper. A Check ...

    Calibrating the digital compass
    The digital compass must be calibrated in the following situations: ▷ An incorrect compass direction is shown. The cardinal direction displayed does not change even if the direction of tra ...