Low beams
Switch position
with the
ignition switched
on: the low beams light up.
See also:
Tool kit
Tool kit
The tool kit is stowed under the cargo floor panel
in the cargo area. ...
Notes
If the battery is discharged, an engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables
with fully insulated clamp handles.
To prevent personal ...
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in
the
button lights up.
4. Press the desired button 1 or
2. The LED
goes out.
If the M button is pre ...
