Notes

Always make sure that safety belts are being worn by all occupants before driving away.

Although airbags enhance safety by providing added protection, they are not a substitute for safety belts.

▷ The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted.

▷ The two outer safety belt buckles, integrated into the rear seat, are for passengers sitting on the left and right.

▷ The center rear seat belt buckle is solely intended for the center passenger.

Never allow more than one person to wear One person per safety belt

Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.

Lay the belt, without twisting, snugly Putting on the belt

Lay the belt, without twisting, snugly across the lap and shoulders, as close to the body as possible. Make sure that the belt lies low around the hips in the lap area and does not press on the abdomen. Otherwise, the belt can slip over the hips in the lap area in a frontal impact and injure the abdomen.

The safety belt must not lie across the neck, rub on sharp edges, be routed over solid or breakable objects, or be pinched.

Avoid wearing clothing that prevents the Reduction of restraining effect

Avoid wearing clothing that prevents the belt from fitting properly, and pull the shoulder belt periodically to readjust the tension across your lap; otherwise, the retention effect of the safety belt may be reduced.

    See also:

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. There is a flat tire or a major loss in tire inflation pressure. The system was not reset after a wheel change ...

    Convertible: convertible top
    The fully automatic top combines reliable weather protection with simple and easy-touse operation. The following tips will enhance your driving pleasure in your Convertible: > It is recommended ...

    Street does not exist in the destination city/town
    The desired street does not exist in the specified city/town because it belongs to another part of the city/town. 1. "Navigation" 2. "Enter address" 3. Select "Street&q ...