Applying your current speed as the limit
1. "Settings"
2. "Speed"
3. "Select current speed"
The system adopts your current speed as the limit.
See also:
Programming
Programming
1. Memory buttons
2. LED
Fixed-code hand-held transmitters
1. Switch on the ignition, refer to page 61.
2. Initial setup:
Press both outer memory buttons 1 for approx.
20 seconds ...
Determining the load limit
1. Locate the following statement on your vehicle’s
placard*:
The combined weight of occupants and
cargo should never exceed XXX kg or
YYY lbs. Otherwise, damage to the vehicle
and un ...
Configuring the prewarning
After the warning function is switched on, the
following can be set via the iDrive:
The prewarning can be switched on/off.
The time of the prewarning can be set.
These settings have no effe ...
