Signaling a turn

Press the lever beyond the resistance point.

To switch off manually, press the lever to the resistance point.

Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb has failed.

Signaling a turn briefly

Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

Triple turn signal activation

Triple turn signal activation Press the lever to the resistance point.

The turn signal flashes three times.

This function can be activated or deactivated:

1. "Settings" 2. "Lighting" 3. "Triple turn signal"

Triple turn signal
Triple turn signal

The setting is stored for the remote control currently in use.

    See also:

    Options menu
    The split screen is not available and there is no Integrated Owner's Manual. Operation is the same as for the front menu options. ...

    For US owners only
    The transmitter and receiver units comply with part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following: FCC ID: ▷ NBG009014A. Compliance ...

    Preparation
    1. Check whether the battery of the other vehicle has a voltage of 12 volts. This information can be found on the battery. 2. Switch off the engine of the assisting vehicle. 3. Switch off any el ...