Opening and closing: Using the door lock

You can set the way in which the car is unlocked.

You can set the way in which the car is unlocked.

there is any person inside, because the vehicle cannot be unlocked from inside without Do not lock the vehicle from the outside if there is any person inside, because the vehicle cannot be unlocked from inside without special knowledge.

Coupe

Comfort Access, only the driver's door can be locked via the door lock. In vehicles without an alarm systemor

Comfort Access, only the driver's door can be locked via the door lock.

To lock both doors, the fuel filler flap and the trunk lid together:

1.  With the doors closed, lock the vehicle using the button for the central locking system in the interior.
2.  Unlock and open the driver's or front passenger door.
3.  Lock the vehicle.

> Lock the driver's door using the integrated key in the door lock, or press down the lock button of the front passenger door and close the door from the outside.

Convenient opening and closing

Coupe: if the vehicle is equipped with an alarm systemor Comfort Access, you can also operate the windows and glass roofvia the door lock.

Convertible: you can operate the windows and convertible top via the door lock.

Hold the key in the position for unlocking or locking.

the convertible top, watch the process and ensure that no one becomes trapped. Releasing During each closing procedure, and when opening the convertible top, watch the process and ensure that no one becomes trapped. Releasing the key stops the operation.

Manual operation

In the event of an electrical malfunction, you can lock and unlock the driver's door by turning the integrated key to the corresponding limit positions in the door lock.

    See also:

    INTERIOR
    The X5's interior lives up to luxury standards; it's not flashy, but the quality materials used inside and the attention to detail tell you it's no ordinary vehicle. My test car had upgrades like ...

    Transmission positions
    D Drive, automatic position Position for normal vehicle operation. All forward gears are available. R is Reverse Select only when the vehicle is stationary. N is Neutral Use in automatic car was ...

    Rear operation
    The control unit is located in the center console in the rear. Rear operation 1. Temperature, left rear seating area 2. AUTO program 3. Display 4. Temperature, right rear seating area 5. Sea ...