Automatic mode
The Auto Start/Stop function is operational after each engine start.
The function is activated above a certain speed.
► Automatic transmission: from 5 mph, approx. 9 km/h.
See also:
Configuring the warning time
After the warning function is switched on, the
warning time can be set via the iDrive. For a late
warning time, prewarning is deactivated.
These settings have no effect on the time of the
warni ...
Functional requirements
The system must have been reset while the inflation
pressure was correct; otherwise, reliable
signaling of a flat tire is not ensured.
Always use wheels with TPM electronics to ensure
that the ...
Entering dates
Enter the dates for the required inspections.
Make sure the date on the Control Display is set
correctly
1. "Vehicle Info"
2. "Vehicle status"
3. "Service
required&qu ...