The concept
The iDrive combines the functions of a multitude of switches. Thus, these functions can be operated from a central location.
Using the iDrive during a trip
To avoid becoming distracted and posing
an unnecessary hazard to your vehicle's occupants
and to other road users, never attempt to
use the controls or enter information unless traffic
and road conditions allow this.◄
See also:
Switching off automatically
The system switches off and the LED goes out:
After approx. 33 ft/10 m when driving forward.
Above approx. 9 mph/15 km/h when driving
forward.
Switch on the system again if necessary. ...
Functional requirements
The system must have been reset while the inflation
pressure was correct; otherwise, reliable
signaling of a flat tire is not ensured.
Always use wheels with TPM electronics to ensure
that the ...
Entering appointment dates
Enter the dates for the required inspections.
Ensure that the vehicle date and time are set
correctly.
1. "Vehicle Info"
2. "Vehicle status"
3. "Service required"
...
