Navigation data
Information on the navigation data
1. "Navigation"
2. "Options" Open.
3. "Navigation system version": information on
the data version is displayed.
Updating the navigation data
General information
Navigation data and authorization codes are available from your service center. Navigation data are stored in the vehicle and can be updated.
▷ Depending on the data volume, a data update
may take several hours.
▷ Update during the trip to preserve battery.
▷ During the update, only the basic functions
of the navigation system are available.
▷ The status of the update can be viewed.
▷ The system restarts after the update.
▷ The data carrier with the navigation data can
be removed after the update is complete.
Perform an update
1. Insert the navigation DVD into the DVD
player with the labeled side facing up.
2. Follow the instructions on the Control Display.
3. Enter the authorization code of the navigation
DVD and change the DVD if needed.
After interrupting your trip, follow the instructions
on the Control Display.
Viewing the status
1. 
Press the button
2. "Navigation update"
See also:
Functional requirement
▷ To lock the vehicle, the remote control must
be located outside of the vehicle..
▷ The next unlocking and locking cycle is not
possible until after approx. 2 seconds..
▷ The e ...
Activating assistance functions
Several assistance functions can be active at the
same time.
Showing the parking aid lines
"Parking aid lines"
Pathway and turning lines are displayed.
Showing the obstacle marking
...
Towing methods when towing other
vehicles
Tow bar
The tow fittings used should be on the same
side on both vehicles.
Should it prove impossible to avoid mounting
the tow bar at an offset angle, please observe
the following:
▷ C ...