Turn signal, high beams, headlamp flasher
See also:
Functional requirements
The system must have been initialized when the
tire inflation pressure was correct; otherwise,
reliable signaling of a flat tire is not ensured. Initialize
the system after each correction of th ...
Measurement
Measurements are made by ultrasound sensors
in the bumpers.
The range is approx. 6 ft/2 m.
An acoustic warning is first given:
By the front* sensors and the two rear corner
sensors at appro ...
Number of safety belts
Your vehicle has been fitted with five safety belts
for the safety of you and your passengers. However,
they can only offer protection when adjusted
correctly. ...
