Switching on automatically

Select transmission position R with the engine running.

The backup camera image is displayed if the system was switched on via the iDrive.

    See also:

    Malfunction
    The cooler cannot be switched on or switches off, e.g., when the cooling system overheats or if the battery voltage is low. One of the LEDs flashes. Remedy the problem 1. If necessary, allow t ...

    Interior rearview mirror
    Reducing the blinding effect Reducing the blinding effect From behind when driving at night: turn the knob. ...

    Programming
    Programming 1. Memory buttons 2. LED Fixed-code hand-held transmitters 1. Switch on the ignition, refer to page 61. 2. Initial setup: Press both outer memory buttons 1 for approx. 20 seconds ...