Malfunction

A Check Control message is displayed.

Adaptive light control is malfunctioning or has failed. Have the system checked as soon as possible.

    See also:

    Programming
    LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

    Automatic-Transmission
    Starting the engine 1. Depress the brake pedal. 2. Press the Start/Stop button. The ignition is activated automatically for a certain time and is stopped as soon as the engine starts. ...

    Car washes
    Notes Steam jets or high-pressure washers When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 F/ 60 C. Holding them too ...