Manual transmission

Switching off the engine

1. With the vehicle at a standstill, press the Start/Stop button.

2. Shift into first gear or reverse.

3. Set the parking brake.

    See also:

    Contacts
    General informationContacts can be created and edited. The contacts from the mobile phone are displayed as well, if this function is supported by the mobile phone. The addresses can be used as des ...

    Display
    ▷ Lines, arrow 1: the system is activated. ▷ Arrows, arrow 2: at least one lane marking was detected and warnings can be issued. ...

    After a power failure
    Only put the parking brake into operation after a power failure The parking brake should only be put into operation again if it was manually released due to an interruption in the supply of el ...