Striking accentuations at the front and rear, adaptive LED headlamps as a fnew option

Precisely modified details in the front view give the new BMW X6 an appearance characterised by exclusive athleticism and supremacy. The standard fog lights are now set in matt finish surrounds in the upper area of the outer air inlets. Their higher and more lateral position emphasises the width of the vehicle. The striking three-dimensional modelling of the frame and newly designed bars, angled in the lower section, make the BMW kidney grille stand out especially conspicuously within the vehicle front section. The angle of the grille bars is flush with the bottom of the headlamp units, thereby creating an additional horizontal line which likewise highlights the wide track and stable road-holding of the new BMW X6.

As an alternative to the standard bi-xenon light, the new BMW X6 is the first vehicle in its segment to be fitted optionally with adaptive LED headlamps. Their bright white light ensures optimum visibility, while their high-quality appearance represents a new interpretation of the brand's hallmark twin circular headlamps. The three-dimensionally shaped luminous rings of the adaptive LED headlamps are strikingly levelled off both at the top and bottom and are overlaid at the upper edge by an LED-fed accent light. The light sources for low and high beam light are LED units positioned on a horizontal bar at its centre, feeding their light into the reflectors in front. In the new BMW X6 M, adaptive LED headlights are fitted as standard.

With its newly designed rear lights with LED technology, the powerfully shaped rear section of the new BMW X6 also features more intense styling. The rear lights are now two LED-fed light banks which create the brand's hallmark night design as a harmoniously glowing light mass. The fact that they are horizontally aligned and stretch far out to the sides emphasises both the width of the vehicle and the flowing transition between the side section and rear.

    See also:

    General information
    Lamps and bulbs make an essential contribution to vehicle safety. The manufacturer of the vehicle recommends that you entrust corresponding procedures to the service center if you are unfamilia ...

    Central locking system
    The concept The central locking system becomes active when the driver's door is closed. The system simultaneously engages and releases the locks on the following: Doors. Trunk lid. Fuel ...

    Vehicle paint
    Regular care contributes to driving safety and value retention. Environmental influences can act on the vehicle paint. Tailor the frequency and extent of your car care to these influences. ...