Notes

When using steam jets or high-pressure Steam jets or high-pressure washers>?

When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃.

Holding them too close or using excessively high pressures or temperatures can cause damage or preliminary damage that may then lead to long-term damage.

Follow the operating instructions for the highpressure washer.◀

washers Cleaning sensors/cameras with highpressure washers When using high-pressure washers, do not spray the exterior sensors and cameras, for Park Distance Control or the backup camera, for instance, for extended periods of time and only from a distance of at least 12 in/30 cm.◀ Wash your vehicle frequently, particularly in winter.

Intense soiling and road salt can damage the vehicle.

    See also:

    Resuming the original route
    If the route section should no longer be bypassed: 1. "Navigation" 2. "Route information" 3. "New route for:" 4. "Remove blocking" ...

    The concept
    The backup camera provides assistance in parking and maneuvering backwards. The area behind the vehicle is shown on the Control Display. ...

    Exterior mirrors
    At a glance 1 Adjusting 2 Left/right, Automatic Curb Monitor* 3 Fold in and out* General information The mirror on the passenger side is more curved than the driver's side mirror. Estimatin ...