Tow fitting
The screw-in tow fitting should always be carried in the vehicle. It can be screwed in at the front or rear of the BMW.
It is stored with the tool kit under the cargo floor cover in the cargo area
Tow fitting, information on use
▷ Use only the tow fitting provided with
the vehicle and screw it all the way in.
▷ Use the tow fitting for towing on paved roads only.
▷ Avoid lateral loading of the tow fitting, e.g., do not lift the vehicle by the tow fitting.
Otherwise, damage to the tow fitting and the vehicle can occur.◀
See also:
Changing, maintaining, and storing the speed
The rocker switch can be pressed while the system
is interrupted to maintain and store the current
speed. DSC Dynamic Stability Control is
switched on, if necessary.
Adapting the desired s ...
Switching on/off the automatic climate
control
Switching off
With the blower at its lowest
setting,
press the left side of the button to
switch off the automatic climate control.
Switching on
Press any button to switch the automatic clim ...
System limits
Be alert
Due to system limitations, warnings may
be not be issued at all, or may be issued late or
improperly. Therefore, always be alert and ready
to intervene; otherwise, there is the da ...