In interior
The fuses are located in the front passenger footwell on the underside of the instrument cluster.
1. Unscrew screws, refer to arrows, of footwell trim panel.
2. Lay the trim panel in the footwell.
3. Release the screw, arrow 1, and fold the fuse
carrier down, arrow 2.
4. Replace the fuse concerned.
5. Installation is carried out in the reverse order
of removal. Ensure correct and secure attachment
of the footwell trim panel in the
process.
See also:
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
can be switched off together, such as in the following
situations:
► In automatic car washes.
► In duplex garages.
► During tran ...
Replacing the battery
1. Take the integrated key out of the remote
control.
2. Push in the catch with the key, arrow 1.
3. Remove the cover of the battery compartment;
see arrow 2.
4. Insert a battery of the same ty ...
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...