Split screen map view

The map view can be selected for the split screen independently from the main screen.

1. Open "Options".

2. "Split screen"

3. Move the controller to the right repeatedly until the split screen is selected.

4. Select "Split screen content" or the scale.

5. Select the map view.

▷ "Arrow display"
▷ "Map facing north"
▷ "Map direction of travel"
▷ "Map view with perspective"
▷ "Position"
▷ "Exit ramp view": selected blind driveways
are displayed three dimensionally.
▷ "Traffic conditions/gray map"

6. To change the scale: select the split screen and turn the controller.

    See also:

    Radio ready state and ignition off
    All indicator and warning lamps as well as displays in the instrument cluster go out. Transmission position P with the ignition off When the ignition is switched off, position P is engaged a ...

    Setting the voice dialog
    You can set whether the system should use the standard dialog or a shorter version. In the shorter variant of the voice dialog, the announcements from the system are issued in an abbreviated for ...

    Changing, maintaining, and storing the speed
    The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired s ...