Cooling function
The passenger compartment can only be cooled with the engine running.
Press the button.
The air is cooled and dehumidified and – depending on the temperature setting – warmed again.
The cooling function helps to prevent condensation on the windows or to remove it quickly.
Depending on the weather, the windshield may fog up briefly when the engine is started.
The cooling function is switched on automatically with the AUTO program.
When using the automatic climate control, condensation water, develops that exits underneath the vehicle.
See also:
Message when the system was notreset
A Check Control message is displayed.
The system detected a wheel change but was
not reset.
Warnings regarding the current tire inflation
pressure are not reliable.
Check the tire inflation ...
System limits
Speed range
Best results are achieved when using the system
on well-developed roads and highways.
The desired speed can be selected between
20 mph/30 km/h to 110 mph/180 km/h.
The system can al ...
Switching the high beams on and off
manually
High beams on, arrow 1.
High beams off/headlamp flasher, arrow 2.
To reactivate the High-beam Assistant, press
the button on the turn signal lever. ...