Displays in the instrument cluster
Displays in the instrument cluster
1 Stored desired speed
▷ Green: the system is active.
▷ Orange: the system is interrupted.
2 Selected desired speed appears briefly If the display --- mph or --- km/h appears briefly, conditions may not be adequate to operate the system.
Call up Check Control messages
See also:
Messages after trip completion
Malfunctions indicated during a trip are displayed
again after the ignition is switched off. ...
Message when the system was not
reset
A Check Control message is displayed.
The system detected a wheel change but was
not reset.
Warnings regarding the current tire inflation
pressure are not reliable.
Check the tire inflation pre ...
Display
Night Vision with pedestrian detection is not
available on the rear screen.
Adjustments via the iDrive
With Night Vision switched on:
1. Activate Night Vision with pedestrian detection.
2. Press ...