Drive-off assistant

This system supports driving away on gradients.

The parking brake is not required.

1. Hold the vehicle in place with the foot brake.

2. Release the foot brake and drive away without delay.

Depending on the vehicle load, the vehicle may roll back slightly.

After releasing the foot brake, start driving Driving off without delay
After releasing the foot brake, start driving without delay, since the drive-off assistant will not hold the vehicle in place for more than approx.

2 seconds and the vehicle will begin rolling back.◀

    See also:

    General information
    Two different driver's seat and exterior mirror positions can be stored and retrieved for each remote control. Settings for the backrest width and lumbar support are not stored in memory. ...

    Switching the split screen on and off
    1. Press the button. 2. "Split screen" ...

    Determining the load limit
    1. Locate the following statement on your vehicle’s placard*: The combined weight of occupants and cargo should never exceed XXX kg or YYY lbs. Otherwise, damage to the vehicle and un ...