See also:

Reassigning individual programs
1. Switch on the ignition. 2. Hold the hand-held transmitter at a distance of approx. 1 to 3 in/2.5 to 8 cm from the memory buttons. The required distance depends on the particular hand-held t ...

Changing, maintaining, and storing the speed
The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired s ...

Switching on
The cooler can be operated at two levels. 1. Switch on the ignition. 2. Press the button once for each cooling level. The highest cooling power is active when two LEDs are lit. If the coole ...