Issuing a warning
If the vehicle begins leaving the lane and a lane marking has been detected, the steering wheel begins vibrating.
If the turn signal is set before the lane is changed, a warning is not issued.
Canceling a warning
The warning is canceled:
▷ Automatically after approx. 3 seconds.
▷ After the vehicle returns to its lane.
▷ During heavy brake application.
▷ When the turn signal flashes.
See also:
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection of a flat tire.
Initialization is started by confirming
the inflation pressures.
Do not ...
Controls
Activating
Switch position with the
ignition switched
on.
The turning lamps are automatically switched
on depending on the steering angle or the use
of turn signals.
To avoid blinding onco ...
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Do this by checking the air pressure in all
four tires.
If the tire inflation pressure in all four tires is
correct, the Tire Pressure Monitor may no ...