Status indicator on the Control DisplayThe status is displayed.
The tire and system status is indicated by the color of the tires.
A change in the tire inflation pressure during driving is taken into account.
A correction is only necessary if this is indicated by the TPM
Wheels, green
The tire inflation pressure is equal to the target state.
One wheel is yellow
A flat tire or major drop in inflation pressure in the indicated tire.
All wheels are yellow
▷ A flat tire or major drop in inflation pressure
in several tires.
▷ The system was not reset after a wheel
change and thus issues a warning based on
the inflation pressures initialized last.
▷ A flat tire in one or more tires while the system
is being reset.
Wheels, gray
The system cannot detect a flat tire.
Reasons for this may be:
▷ TPM is being reset.
▷ Disturbance by systems or devices with the
same radio frequency.
▷ Malfunction.
See also:
Measurement
Measurements are made by ultrasound sensors
in the bumpers.
The range is approx. 6 ft/2 m.
An acoustic warning is first given:
By the front* sensors and the two rear corner
sensors at appro ...
Washer fluid reservoir
Adding washer fluid
Only add washer fluid when the engine is
cool, and then close the cover completely to
avoid contact between the washer fluid and hot
engine parts.
Otherwise, there is the ...
Front lamps, bulb replacement
Halogen headlamps
Halogen headlamps
1 Parking lamps
2 High beams/headlamp flasher
3 Low beams
4 Turn signal
5 Daytime running lights
Accessing the turn signals and low beams
Follow the Gener ...