Status display

The current status of the Flat Tire Monitor can be displayed on the Control Display, e.g., whether or not the FTM is active.

1. "Vehicle Info"

2. "Vehicle status"

3. Monitor" "Flat Tire Monitor"

The status is displayed.

    See also:

    Ignition on
    Press the Start/Stop button, and do not press on the brake pedal at the same time. All vehicle systems are ready for operation. Most of the indicator and warning lamps in the instrument cluster ...

    Message when the system was not reset
    A Check Control message is displayed. The system detected a wheel change but was not reset. Warnings regarding the current tire inflation pressure are not reliable. Check the tire inflation pre ...

    Programming
    LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...