Parking lamps
Switch position 
:
the vehicle lamps light
up on all sides, e.g., for parking.
Do not use the parking lamps for extended periods; otherwise, the battery may become discharged and it would then be impossible to start the engine.
When parking, it is preferable to switch on the one-sided roadside parking lamps.
When the driver's door is opened with the ignition switched off: the exterior lighting is automatically switched off when the light switch is in position 0, 2 or 3.
Switch on the parking lamps if necessary, switch position 1.
See also:
Tire identification marks
Tire size
255/50 R 19 103 Y
255: nominal width in mm
50: aspect ratio in %
R: radial tire code
19: rim diameter in inches
103: load rating, not for ZR tires
Y: speed rating, before the R on ZR ...
General information
1. Turn the controller: select letters or numbers.
2. Select additional letters or numbers if
needed.
3. "OK": confirm the entry.
...
The concept
The iDrive combines the functions of a multitude
of switches. Thus, these functions can be operated
from a central location.
Using the iDrive during a trip
To avoid becoming distracted and po ...