Brightness

Setting the brightness

To set the brightness of the Control Display:

1. "Settings"

2. "Control display"

3. "Brightness"

Brightness"
Brightness"

4. Turn the controller until the desired brightness is set.

5. Press the controller.

The setting is stored for the remote control currently in use.

Depending on the light conditions, the brightness control may not be clearly visible.

    See also:

    Resetting the tone settings
    1. "CD/Multimedia", "Radio" or "Settings" 2. "Tone" 3. "Reset" ...

    Switching on/off
    Press the button. On: the LED lights up. Off: the LED goes out. The system can issue warnings at speeds above approx. 30 mph/50 km/h. The state is stored for the remote control currentl ...

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. There is a flat tire or a major loss in tire inflation pressure. The system was not reset after a wheel change ...