The concept
The parking brake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels.
The parking brake can be set manually or automatically:
▷ Manual: by pulling and pushing the switch.
▷ Automatic: by activating Automatic Hold.
See also:
Low tire pressure message
The yellow warning lamp
lights up. A
Check Control message is displayed.
► There is a flat tire or a major loss in
tire inflation pressure.
► The system was not reset after ...
Installing child restraint systems
Observe the child restraint system manufacturer's
instructions when selecting, installing and using child restraint systems. Otherwise,
the protective effect may be diminished.
Standard chil ...
Activating HDC
Activating HDC
Press the button; the LED above the button
lights up.
The LED flashes when the brakes are applied
automatically. ...
