Switching off the engine
Procedure
1. Engage transmission position P with the vehicle stopped.
2. Press the Start/Stop button.
3. Set the parking brake.
4. Remove the remote control from the ignition lock
Before driving into a car wash
The vehicle is able to roll when the following steps are adhered to:
1. With Comfort Access: insert the remote control in the ignition lock.
2. Depress the brake pedal.
3. Engage transmission position N.
4. Release the parking brake or deactivate Automatic Hold.
5. Switch the engine off.
Transmission position P will be engaged:
▷ Automatically after approx. 30 minutes.
▷ If you remove the remote control from the
ignition lock.
See also:
Destination guidance with traffic
bulletins
Semi-dynamic destination guidance
When traffic bulletin reception is switched on,
semi-dynamic destination guidance is active.
The destination guidance system takes the
available traffic informa ...
Environmental conditions
► Say the commands, numbers, and letters
smoothly and with normal volume, emphasis,
and speed.
► Always say commands in the language of
the voice activation system.
► When selec ...
Radio Data System RDS
In the FM waveband, additional information is transmitted via RDS. If the reception
conditions are good, the station names are shown on the Control Display. Where reception
is poor or in the event ...