On the front passenger seat

After installing a child restraint fixing system on the front passenger seat, ensure that the front and side airbags on the front passenger side are deactivated.

If a child restraint fixing system is used in Deactivating the front passenger airbags
If a child restraint fixing system is used in the front passenger seat, the front passenger airbags must be deactivated; otherwise, there is an increased risk of injury to the child when the airbags are triggered, even with a child restraint fixing system.◀

Seat position and height

Before installing a child restraint fixing system, move the front passenger seat as far back as possible and adjust its height to the highest position to obtain the best possible position for the belt and to offer optimal protection in the event of an accident.

Do not change the seat position and height after this.

Backrest width

Before mounting a child restraint fixing system on the front passenger seat, open the backrest width, completely. Do not change the backrest width after this.

Before installing a child restraint fixing Backrest width for the child seat
Before installing a child restraint fixing system in the front passenger seat, the backrest width must be opened completely. Do not change the adjustment after this; otherwise, the stability of the child seat will be reduced.◀

    See also:

    Luxury Line
    The discreet high-gloss chrome elements of this line lend the exterior of the BMW 3-Series Sedan a particularly elegant and exclusive appeal. The BMW kidney grille with 11 fine chrome slats, two s ...

    After a power failure
    Only put the parking brake into operation after a power failure The parking brake should only be put into operation again if it was manually released due to an interruption in the supply of el ...

    At a glance
    1 Function bar 2 Route section with traffic obstruction 3 Traffic sign for traffic obstruction 4 Planned route 5 Current location 6 Upper status field 7 Lower status field Lines in the map S ...