See also:

Programming
LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

Releasing
With the ignition switched on: Manual transmission: Press the switch while the brake or clutch is pressed. Automatic transmission: Press the switch while the brake is pressed or transmission ...

Fuses
Never attempt to repair a blown fuse and do not replace a defective fuse with a substitute of another color or amperage rating; otherwise, this could lead to a circuit overload, ultimately result ...