See also:

Storing
1. Switch on the ignition. 2. Set the desired position. 3. Press the button. The LED in the button lights up. 4. Press the desired button 1 or 2. The LED goes out. If the M button is pressed ...

Coolant level
Checking 1. Let the engine cool. 2. Turn the cap of the expansion tank slightly counterclockwise to allow any excess pressure to dissipate, and then open it. 3. The coolant level is correct if ...

Environmental conditions
▷ Say the commands, numbers, and letters smoothly and with normal volume, emphasis, and speed. ▷ Always say commands in the language of the system. The language for the mobile pho ...