Fuses
Never attempt to repair a blown fuse and do
not replace a defective fuse with a substitute of another color or amperage rating;
otherwise, this could lead to a circuit overload, ultimately resulting in a fire
in the vehicle.
Accessing the fuse box:
1. Open the glove compartment.
2. Remove the damper, arrow 1, from the lower holder by applying forward
pressure.
3. Disengage the glove compartment by pressing on both tabs, arrows 2,
and fold it down.
Plastic tweezers are located on the distributor box.
Information on fuse assignment can be found next to the distributor box.
Spare fuses are available from your BMW center.
After replacing a fuse, press the glove compartment upward until it engages and reattach the damper.
See also:
Controls
Buttons at a glance
1 System on/off, interrupt
2 Resume speed
3 Store speed*
4 Store, maintain/change speed
Switching on
Press the button on the steering
wheel.
The marking in the speedom ...
At a glance
At a glance
0 Lamps off and daytime running lights
1 Parking lamps and daytime running lights
2 Low-beam headlamps and welcome lamps
3 Automatic headlamp control, daytime runninglights, welcome ...
Tire inflation pressures at max. speeds above 100 mph/160 km/h
Speeds above 100 mph/160 km/h
In order to drive at maximum speeds in excess
of 100 mph/160 km/h, please observe, and,
if necessary, adjust tire pressures for speeds
exceeding 100 mph/160 km/h ...