Emissions

The vehicle is producing higher emissions. The trip can be continued. Have the The warning lamp lights up:

The vehicle is producing higher emissions. The trip can be continued. Have the car checked as soon as possible.

The lamp flashes under certain conditions. This indicates excessive misfiring Canadian models display this warning lamp.

The lamp flashes under certain conditions. This indicates excessive misfiring in the engine. If this happens, you should reduce your speed and visit your nearest BMW center as soon as possible. Severe engine misfiring can quickly lead to serious damage of emissionsrelated components, especially the catalytic converter.

not properly tightened and the OBD system assumes that fuel vapor is escaping. Make The warning lamp comes on if the fuel cap is not properly tightened and the OBD system assumes that fuel vapor is escaping. Make sure that the fuel cap is correctly positioned and close it until it audibly clicks.

Data memory

Your vehicle records data about the operation, faults, and user settings. These data are stored in the vehicle and in extract form, in the remote control, and can be read out using suitable devices at your BMW center. The data that are read out are used to support service procedures and repairs or to optimize and expand vehicle functions. If you have a BMW Assist contract, certain vehicle data can also be transmitted directly from the vehicle in order to enable the desired services.

    See also:

    Opening the main menu
    Press the button. The main menu is displayed. All iDrive functions can be called up via the main menu. ...

    Manual transmission
    Switching off the engine 1. With the vehicle at a standstill, press the Start/Stop button. 2. Shift into first gear or reverse. 3. Set the parking brake. ...

    For better control
    The indicator lamp flashes: DTC controls the drive forces and brake forces. The indicator lamp lights up: DSC and DTC has failed. DTC activated: The indicator lamp lights up and TRACTION ...