Video playback
Overview
Video playback possible via snap-in adapter. They can be operated via iDrive. Sound is output over the vehicle speakers.
PlaybackFor your own safety, the video image is only displayed up to approx. 2 mph/3 km/h and in some market-specific versions, only with the parking brake engaged or the selector lever of the automatic transmission is in the park position.
1. "CD/Multimedia"
2. "External devices"
3. Select the symbol.
4. "Video"
5. Select the directory, if necessary.
To change to a higher level directory: move the controller to the left.
6. Select the desired video file to begin playback.
Video menu
NotesDo not expose the audio device to extreme environmental conditions, e.g. very high temperatures, refer to the operating instructions of the audio device.
Depending on the configuration of the audio files, e.g. bit rates greater than 256 KBit/s, the files may not play back correctly in every case.
Notes on connecting
> The connected audio device is supplied with a maximum current of 500 mA, if
the device supports this. For this reason, do not connect the device to a charging
socket in the vehicle; otherwise, it may not be possible to ensure correct playback.
> Do not forcibly connect the plug to the USB
interface.
> Do not connect devices such as fans or lamps to the USB audio interface.
> Do not connect USB hard drives.
> Do not use the USB audio interface to charge external devices.
See also:
Overview, instrument cluster
1 Fuel gauge
2 Speedometer
3 Indicator/warning lamps
4 Tachometer
5 Engine oil temperature
6 Electronic displays
7 Display/reset miles ...
Notes
▷ Do not cover lower screen edge, since this
is where the sensors and the infrared interface
are installed.
▷ When loading the rear seats and adjusting
the backrest of the front sea ...
Bluetooth audio
At a glance
▷ Music files on external devices such as audio
devices or mobile phones can be played
back via Bluetooth.
Use of a mobile phone as an audio source.
▷ The sound is outpu ...