Convertible: through-loading opening with integrated transport bag
The transport bag is designed for safe, clean transport of up to 4 pairs of standard skis or up to 2 snowboards.
With the transport bag you can stow skis up to a length of 6.6 ft/2.0 m. When skis of 6.6 ft/2.0 m length are loaded, the overall capacity of the ski bag is reduced due to its tapered design.
When using the transport bag, it is not permissible
to transport passengers in the rear seats.
1. Pull the grip in the filler piece of the rear backrest up and take out
the filler piece.
2. Place the filler piece onto the seat cushion with the backrest side facing
up.

3. In the cargo area: press the two recesses together and fold down the cover.

4. Release the strap, lay out the transport bag between the front seats and load it.
The zip fastener makes objects in the ski bag easier to reach.

Ensure that the skis are clean when you load them into the transport bag. Wrap sharp edges to prevent damage.
Securing cargo
After loading, secure the transport bag and its contents. Tighten the retaining strap on the tensioning buckle for this purpose.
Secure the transport bag in the manner described;
otherwise, it could endanger the car's occupants, e.g. in case of heavy braking
or sudden swerving.
To store the transport bag, perform the steps described for loading in reverse order.
See also:
New dimensions in driving pleasure and dynamic performance: Sporty power
delivery, outstanding efficiency and enhanced ride comfort
The sixth-generation BMW 3-Series sports sedan models offer top-level agility
and driving dynamics, and they combine all this with new levels of comfort. At
the same time, there is no change to th ...
FTM Flat Tire Monitor
The concept
The system does not measure the actual inflation
pressure in the tires.
It detects a pressure loss in a tire by comparing
the rotational speeds of the individual wheels
while moving ...
Display on the Control Display
Switching on the backup camera via the
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in ...
