Adaptive Light Control
The concept
Adaptive Light Control is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road.
In tight curves such as on switchbacks or when turning, at speeds up to approx. 40 mph/70 km/h, an additional, cornering light is switched on that lights up the area inside the curve.
Activating Adaptive Light ControlWith the ignition switched on, turn the light switch to position 3.
The corner-illuminating lamp is switched on automatically, depending on the steering wheel angle or turn signal indicator.
Standstill function: to avoid blinding oncoming traffic, the Adaptive Light Control directs light toward the front passenger side when the vehicle is at a standstill.
When you are reversing, only the corner-illuminating lamps are switched on and active on both sides.
Malfunction
The warning lamp lights up. A message appears
on the Control Display. The Adaptive Light Control is malfunctioning or failed.
Have the system checked as soon as possible.
See also:
Drive away without delay
Do not wait for the engine to warm up while the
vehicle remains stationary. Start driving right
away, but at moderate engine speeds.
This is the fastest way for the cold engine to
reach its oper ...
Tire inflation pressures at max. speeds
above 100 mph/160 km/h
Speeds above 100 mph/160 km/h
In order to drive at maximum speeds in excess
of 100 mph/160 km/h, please observe, and,
if necessary, adjust tire pressures for speeds
exceeding 100 mph/160 km/h ...
Changing the map section
"Interactive map"
To shift the map: move the controller in the
required direction.
To shift the map diagonally: move the controller
in the required direction and turn it.
...