headlamp flasher

1.  High beams

1.  High beams
2. Headlamp flasher
3.  Turn signal

Using turn signals

Press the lever beyond the resistance point. To turn off manually, press the lever to the resistance point.

and the turn signals indicates that one of the turn signal bulbs has failed. Unusually rapid flashing of the indicator lamp and the turn signals indicates that one of the turn signal bulbs has failed.

Signaling a turn briefly

Press the lever as far as the resistance point for as long as you wish to signal a turn.

Triple turn signal activation

Press the lever as far as the resistance point. The turn signals flash three times.

You can activate or deactivate this function.

1.  "Settings"
2.  "Lighting"
3.  "Triple turn signal"

The setting is stored for the remote control currently in use.

The setting is stored for the remote control currently in use.

    See also:

    Contacts
    At a glance Contacts can be created and edited. The contacts from the mobile phone* are displayed as well if this function is supported by the mobile phone. Addresses can be adopted as destinat ...

    Putting into operation after a power failure
    Putting the parking brake into operation The parking brake should only be put into operation again if it was manually released due to an interruption in the supply of electrical power. Otherw ...

    Automatic deactivation
    In certain situations, the Automatic Engine Start/ Stop Function is deactivated automatically for safety reasons, such as when the driver is detected to be absent. Malfunction The automatic engin ...