Switching off the engine

you leave the vehicle. Always take the remote control with you when you leave the vehicle.

When parking, apply the parking brake forcefully; otherwise, the vehicle could begin to roll.

Manual transmission

1.  With the car at a standstill, press the Start/ Stop button.
2.  Shift into first gear or reverse.
3.  Forcefully apply the parking brake.
4.  Removing the remote control from the ignition lock.

Automatic transmission

1.  With the car at a standstill, move the selector lever to position P.
2.  Press the Start/Stop button.
3.  Forcefully apply the parking brake.
4.  Removing the remote control from the ignition lock.

Sport automatic transmission with double clutch

1.  With the car at a standstill, press the Start/ Stop button.

If the transmission is shifted into N when the engine is switched off, you will be notified visually and acoustically of this fact.

2.  Forcefully apply the parking brake.
3.  Remove remote control from the ignition lock. The transmission is automatically shifted into transmission position P.

    See also:

    At a glance
    1. Rear fog lamps 2. Front fog lamps 3. Automatic headlamp control, Adaptive Light Control , High-beam Assistant, Welcome lamps, daytime running lights 4. Lamps off, daytime running lights 5. ...

    General information
    BMW Assist provides you with certain services, e.g., transmission of the position data of your vehicle to the BMW Assist Response Center if an Emergency Request has been initiated. Many BMW Ass ...

    Resetting the system
    Reset the system after each correction of the tire inflation pressure and after every tire or wheel change. 1. "Vehicle Info" 2. "Vehicle status" 3. "Reset" 4. S ...