See also:

Storing a channel
1. "Radio" 2. "Satellite radio" 3. If necessary, open "All channels" or the desired category. 4. Select the desired channel. 5. Press the controller again. 6. Press ...

Storing
1. Switch on the ignition. 2. Set the desired position. 3. Press the button. The LED in the button lights up. 4. Press the desired button 1 or 2. The LED goes out. If the M button is presse ...

Programming
LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...